1, kettle, kettle cover 1 cr18ni9ti stainless steel processing, body by thread and flange connection, kettle cover for the traditional flat cover, both by circumferential uniform main bolt, nut fastening connection.
2, autoclave, the main seal USES A type of double seal, the sealing point adopts arc surface and plane, arc surface and the line contact seal form, rely on the contact surface of high precision and smooth finish, good sealing effect.
3, kettle body is equipped with bucket core silicon carbide furnace, electric stove wire wear in the core, its end by the lower part of the shell side, through the terminal screw, rubber sets of cables are connected to the controller.
4, kettle cover is equipped with pressure gauge, blasting safety device, liquid valve, temperature sensor, etc., to facilitate informed response within the kettle, adjust the kettle in the proportion of medium, and ensure the safe operation.
5, coupling is mainly composed of strong magnetic force of the internal and external circular, there is pressure on the casing. Agitator driven by servo motor through the coupling. Control the speed of the servo motor, can achieve the goal of control stirring speed.
6, the upper casing is equipped with speed measuring coil, the blender into an organic whole repeatedly with the magnetic ring rotates, speed measuring coil produce inductive electromotive force and the electric potential and stirring speed, corresponding to the electric potential is passed on to the tachometer, can show the stirring speed.
7, magnetic coupling between the kettle lid and equipped with a cooling jacket, when operating at high temperature of cooling water, and demagnetization magnetic steel temperature is too high.
8, 1 cr18ni9ti stainless steel bearings or bearing adopts high-strength graphite, electrochemical friction loss, and long maintenance period