There are three key control sections:
1.Temperature probe
2. is a refrigeration compressor
3. hot air blower, and some with infrared heating, or direct resistance wire heating
The measuring end of the temperature probe extends in the air inside the incubator, and can not avoid contact with the object or the casing. The temperature in the chamber is monitored in real time. In the control panel, the constant temperature range of the incubator can be set, that is, the allowable upper limit of the temperature and Lower limit, when the probe detects the temperature below the lower limit, turn on the hot air heater heating, the temperature began to rise, when the probe detects the temperature is higher than the upper limit, open the refrigeration compressor cooling, temperature drop, so back and forth control.
Some thermostats more advanced, you can set the degree of deviation, for example, under normal circumstances, the temperature should reach the lower limit starts heating, then heating later, because after the start of the heating, the temperature may have to drop for a period of time, then you can set Deviation, so that it is heated or cooled in advance.
The company specializes in producing and selling various types of incubators, welcome to consult procurement.
E-mail:sales@sumerlab.com
Web:sumerinstrument.com