Operation procedure for cleaning (or disinfecting) an ice maker disassembly unit:
1. Turn off the ice maker's water supply and shut off the ice maker's power supply;
2. Remove the parts that need to be cleaned (or disinfected), such as curtains and water distribution pipes;
3. Soak the removed parts in an appropriate amount of cleaning (or disinfection) solution, the ratio of which is given in the table below: Solution Category Water Cleaning/Disinfectant Amount Cleaning Solution 1 Gallon (4 L) 16 oz (500 mL) Sterilize Solution 4 gallons (15 liters) 3 ounces (90 ml)
4. Carefully clean the parts with a soft brush or sponge (do not use a metal brush);
5. Wash the top, side, and bottom of the evaporator protrusions with a solution and a brush;
6. Thoroughly rinse all washed (or disinfected) parts with clean water;
7. Install the removed parts;
8. Turn on water and power.
The company specializes in selling various types of ice machines and welcomes customers who are in need to consult and purchase.
E-mail:info@sumerlab.com