Ultrasonic cleaner is an indispensable product for today's cleaning industry. Its appearance solves the cleaning problem, improves the cleaning efficiency of the cleaning industry, and at the same time solves the time-consuming and laborious problem of manual cleaning. In many fields, multi-tank ultrasonic cleaners can be used to clean items, because the items cleaned in this way are more clean than manual cleaning, but if you want to get better cleaning quality, you must follow the requirements In addition to operating various procedures, you also need to understand these precautions for the use of multi-tank ultrasonic cleaners.
1. Cleaning basket
It is often necessary to use a cleaning basket when using a multi-tank ultrasonic cleaning machine to clean some smaller parts. However, the mesh on the cleaning basket will cause ultrasonic attenuation, so special attention should be paid to choosing a cleaning basket with a suitable mesh size. In addition, it is recommended Choose stainless steel cleaning baskets, try not to use plastic frames, which can prevent static electricity.
2. Cleaning time
Usually, the cleaning time of each process is set at three to five minutes. If the surface area of the cleaned item is relatively large, or the structure of the workpiece is relatively complex, pay attention to adjust the cleaning time of the multi-tank ultrasonic cleaning machine according to the actual situation. If the objects to be cleaned are prone to overlap and adherence, you can shake the workpiece when the objects to be cleaned are put in and out of the bath to allow the cleaning agent to fully contact the workpiece to improve the cleaning effect.
3. Add liquid and string tank
When cleaning the workpiece with a multi-tank ultrasonic cleaning machine, pay attention to the tank liquid not to be too full, so as to avoid the phenomenon of mixing between the two tanks of ultrasonic cleaning agent and cleaning the bottom of the basket when draining. In addition, each tank of the multi-tank ultrasonic cleaning machine should be an independent operation process. Be careful not to use the two tanks of cleaning agent in series or artificially reduce the operation process and cleaning operation time.
The above are the points that you need to pay more attention to when cleaning the workpiece with the multi-tank ultrasonic cleaner. Although the multi-tank ultrasonic cleaning machine has very high cleaning performance, it is operated in accordance with the regulations and requirements. The best cleaning effect can only be obtained when the ultrasonic cleaning machine is used to clean the workpiece according to the procedure.