Precautions For Use Of Carbon Dioxide Incubator

1. The instrument shall be placed on a flat ground, the environment shall be clean and tidy, dry and ventilated;
2. Before using the instrument, all control switches shall be in non working state;
3. Do not adjust the inlet gas pressure to too large to avoid breaking the pipeline and damaging the detector;
4. Close the door of the incubator to avoid gas leakage and affect the test effect;
5. Before each shutdown, each control switch shall be in the non working state before cutting off the power supply;
6. The setting of operation password shall be known by at least 3 people to avoid forgetting the password and failing to turn on the instrument;
7. The cylinder gas shall be pure and up to standard to avoid damaging the instrument;
8. Keep the air in the incubator clean and disinfect regularly;
9. Always pay attention to the amount of distilled water in the distillation tank to keep the relative humidity in the tank and avoid evaporation of the culture solution;
10. It is not applicable to the cultivation of articles containing volatile chemical solvents, low concentration explosive gas and low ignition point gas and toxic articles.
11. Correctly use and pay attention to the maintenance of the instrument to make it in good working condition, which can extend the service life of the instrument;
12. After the refrigeration system stops working, wipe the working chamber and glass observation window with soft cloth;
13. During continuous operation of the instrument, regular inspection shall be conducted every three months; check whether there are water drops, dirt, etc. falling on the motor and exposed refrigeration elements; clean the dust and dirt on the compressor and condenser; check the fuse, control elements and fastening screws;
14. After long-term use, natural wear and tear of the instrument is normal, and the manufacturer shall be contacted for maintenance.